Perreaux eloquence 150i, Руководство пользователя

Страница: 30 / 33

Technical Specifications
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical meas-
urements must be subject to qualitative as well as quantitative interpreta-
tion. Measurements of the éloquence 150i reveal excellent results by any
standards.
All specifications are accurate at the time of printing. Perreaux Industries
Ltd. reserves the right to adjust specifications without notice. All specifica-
tions measured at 230V after a 10 minute warm up period.
Rated Power Output: 150Wrms per channel into 8Ω
300Wrms per channel into 4Ω
Maximum Power Output: 190Wrms per channel into 8Ω
310Wrms per channel into 4Ω
Output Voltage:
Amplifier 42Vrms
Pre Outs 7.8 Vrms
Tape Outs 7.8 Vrms
Frequency Response:
Amplifier +0dB, -0.1dB from 20Hz to 20kHz
+0dB, -0.6dB from 10Hz to 60kHz
Preamplifier +0dB, -0.05dB from 20Hz to 20kHz
+0dB, -0.15dB from 10Hz to 60kHz
Distortion (THD + noise):
Amplifier 0.002%, 1kHz at 1W into 8Ω
<0.04%, 20Hz to 20kHz at 1W into 8Ω
0.002%, 1kHz at 150W into 8Ω
<0.04%, 20Hz to 20kHz at 150W into 8Ω
Preamplifier 0.001%,1kHz (RCA)
<0.002%, 20Hz to 20kHz (RCA)
0.001%,1kHz (XLR)
<0.002%, 20Hz to 20kHz (XLR)
Signal to Noise Ratio (unweighted):
Amplifier better than 96dB, ref. rated output into 8Ω
Unbalanced Inputs 120dB, ref. 1Vrms at 0dB (RCA)
Balanced Inputs 120dB, ref. 1Vrms at 0dB (XLR)
Damping Factor:
800 at 1kHZ
Slew Rate: +55V/µS, -55V/µS
Maximum Current:
Continuous (electronically limited) 18Arms
Short duration 30Arms
Input Sensitivity: 1.27Vrms for rated output
Input Impedance:
Unbalanced Inputs 10kΩ (RCA)
Balanced Inputs 20kΩ (XLR)
Main Inputs 33kΩ (RCA)
Input Overload:
Unbalanced Inputs 7.8Vrms (RCA)
Balanced Inputs 7.8Vrms (XLR)
Gain:
27