Perreaux eloquence 150i, Руководство пользователя

Страница: 28 / 33

Care and Maintenance
The 150i has been designed to provide many years of trouble free enjoy-
ment. It is important to keep the exterior of the unit clean.
Notes: Always switch the unit off and remove the power cord from the rear
of the amplifier before attempting to clean your éloquence 150i integrated
amplifier in the manner described below.
Never apply liquid directly to the amplifier.
Never use abrasives.
Never rub in a circular motion.
Front Panel and Cover
The front panel and cover feature a durable, high-quality annodised finish.
To remove finger marks and dirt, simply rub the surface with a soft cloth.
If the dirt is not removed, use a small quantity of isopropyl alcohol on a rag
and rework the effected area.
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
Check the mains fuse of the amplifier.
Check fuse in the mains plug or adaptor.
There is no sound
Check that the source component is properly connected.
Check that the source component playing.
Check that the speakers are properly connected.
Make sure the amplifier is not muted.
There is no sound on one channel
Ensure the balance control is in the correct position.
Check speaker connections.
Check interconnects.
There is a loud buzz or hum
Ensure no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the amplifier.
Unable to make or play tape recordings
Check TAPE OUT has been connected correctly.
There is weak bass or diffused stereo imaging
Ensure the speakers are not wired out of phase.
Protection message on display
See section on éloquence protection system.
The remote handset will not function
Check that the battery has not expired.
Ensure that nothing is blocking the remote sensor.
25