Perreaux eloquence 150i, Руководство пользователя

Страница: 23 / 33

Volume Configuration
The volume is not directly adjusted by the knob on the front panel, as per traditional potentiometer vol-
ume controls; instead it is adjusted by software controlled volume circuitry. Since the volume control
circuitry is under software control, it is possible to customise its behaviour in a number of ways.
Initial Volume
The initial volume screen allows you to set the volume level that the amplifier will be set to when it is
powered up.
Note: The volume level will change to reflect the current initial volume setting and will change as you
alter the initial volume setting, giving you an indication of what the volume level is.
The factory default initial volume is -40.0dB.
Maximum Volume
The maximum volume screen allows you to establish a maximum level to which the volume can be set.
It is particularly useful if the system is sometimes used by people who may not be as careful as you
would be – teenaged children come to mind.
The factory default maximum volume is +00.0dB.
Balance
The balance screen gives you fine control over the relative volumes of the Left and Right channels.
The volume of one channel relative to the other can be changed in increments of 0.5dB, up to 40.0dB
– beyond this; the output of the reduced channel will be muted entirely.
The factory default balance is 00.0dB.
Ramp
The volume ramp menu allows you to select the rates at which the volume will ramp up or down when
changing between inputs and when muting.
Selecting OFF results in no ramping of volume when changing between inputs and a direct change in
volume to the muted level. Selecting FAST, MEDIUM or SLOW will result in a corresponding volume
ramp rate. The factory default volume ramp is MEDIUM.
20