Perreaux eloquence 150i, Руководство пользователя

Страница: 13 / 33

Link™ IR receiver) allows the amplifier to be placed inside a cabinet or
outside the normal line-of-sight of the remote control. The plug must meet
the specifications shown below:
Sleeve: +12VDC
Ring: GND
Tip: Signal
Note: Do not use a mono 3.5mm ( 8 ”) plug, this may cause damage to the
IR input.
7 IR Output
The IR (infrared) output allows your éloquence 150i to relay un-modulated
commands received via the IR sensor on the front panel, or to pass on
commands from home automation systems or other components received
via the IR input.
The IR output uses a mono 3.5mm (
8
”) plug, and transmits voltages from
0V DC up to 12V DC. The plug must meet the specifications shown below:
Sleeve: GND
Tip: Signal
8 RS-232 Port
The RS-232 (RJ45) port is used both for downloading new operating
software into your éloquence 150i integrated amplifier (for example, should
new features ever be added), and also for external control of the amplifier
4 Tape Out
The unbalanced (RCA) tape outputs provide a single-ended line level audio
signal, suitable for recording from the selected source input. This output is
disconnected when INPUT 5 is selected; to prevent any potentially damag-
ing feedback loops if the tape output is connected to this input.
5 Trigger Output
The trigger output allows your éloquence 150i to control the standby state
of a remotely connected device. The remote trigger output accepts a mono
3.5mm (
8 ”) plug. The trigger output voltage is 12V DC when the amplifier
is not in standby and is 0V DC when in stadby.
The trigger output plug must meet the specifications shown below:
Sleeve: GND
Tip: Signal
6 IR Input
The IR (infrared) input allows your éloquence 150i to receive un-modulated
commands from home automation systems or other components.
The IR input uses a stereo 3.5mm ( 8 ”) plug, and accepts voltages of 0V DC
up to 12V DC. The plug must meet the specifications shown below:
Sleeve: No connection
Ring: GND
Tip: Signal
Using an external IR receiver module (for example, Xantech 490-30 Micro
Sleeve Ring Tip
Sleeve Ring Tip
Sleeve Tip
Sleeve Tip
10