PERODUA VIVA L250 2007, Руководство пользователя

Страница: 343 / 370

If the oil level is satisfactory, reinstall the filler
plug with new gasket interposed and tighten
it securely.
Tightening torque: 29.4 - 49.0 N.m
(21.6 - 36.1 ft-lb, 3.0 - 5.0 kgf-m)
When the oil level is low, add the specified oil
until it starts to flow out the filler hole.
For recommended manual transmission oil,
see section 14.Reinstall the filler plug with
new gasket interposed and tighten it
securely.
Tightening torque: 29.4 - 49.0 N.m
(21.6 - 36.1 ft-lb, 3.0 - 5.0 kgf-m)
-t? 1n
Automatic transmission
fluid level check
(EJ-VE only)
Check the fluid level when the transmission
fluid temperature is 70 - so 0 c.
If the vehicle has been driven for about 15
minutes at a speed of 60 km/h (37mph) or for
about 30 minutes at a speed of 40 km/h
(25mph), the fluid temperature becomes
about 70 - so 0 c.
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine at idling speed and firmly
depress the brake pedal. Move the shift
lever from® to© smoothly and return to
®
3. Pull the dipstick out and wipe it clean.
Insert it into the original position.
4. Pull the dipstick out and check the fluid
level to see if it is within the "HOT" range.
5. If the oil level is too low, add the specified
fluid through the oil filler tube slowly. Do
not overfill.
For recommended automatic transmission
fluid, see Section 14.
6. Securely insert the dipstick.
7. Wipe off any spilt fluid.
CAUTION
• If the fluid is dirty, have the fluid
changed by an authorized Perodua
Service Centre.
• If the fluid level is too low, or if fluid
decreases noticeably, have the
system checked by an authorized
Perodua Service Centre.
WARNING
Be careful not to burn yourself as
the fluid may be hot.
Never touch or come close to the
moving parts while the engine is
running, to help reduce the risk of
serious bodily injury.