Permobil C500 Скачать руководство пользователя

Страница: 53 / 100

Owner´s Manual Permobil C500

Handling

Driving on Uphill Slopes

Driving on uphill slopes must always be performed with great care.

Avoid abrupt avoidance maneuvers and never maintain a speed higher than that
at which you can maneuver the wheelchair in a safe and secure manner.

When driving on uphill slopes with an uneven surface (for example grass,
gravel, sand, ice or snow) a great deal of extra care must be observed.

Do not drive up an uphill slope of greater than 12 degrees.
*

)

Dynamic stablility according to ISO 7176-2= 6°.



WARNING

Max 12°*

)

Operating the seat lift, seat tilt, backrest recline changes the center of gravity and increases the
risk of tipping over, hence those seat functions shall only be used on level ground, driving in low
speed with great caution.



WARNING

Содержание C500





































































































Результаты поиска

Содержание C500

Отзывы:

Похожие инструкции для C500

Бренды по названию

Популярные бренды

Permobil C500, Руководство пользователя

Результаты поиска

Содержание C500

Отзывы:

Похожие инструкции для C500

Бренды по названию

Популярные бренды