Permobil C500 Скачать руководство пользователя | Manualshive

Страница: 43 / 100

background image

Owner´s Manual Permobil C500

Design and Function

43

Speed Increase Button

This button increases the maximum speed setting. Depending on the way the
control system has been programmed a momentary screen may be displayed
when the button is pressed.

Mode Button

The Mode button allows the user to navigate through the available operating
Modes for the control system. The available modes are dependant on program-
ming and the range of auxiliary output devices connected to the control system.

Profile Button

The profile button allows the user to navigate through the available Profiles for
the control system. The number of available Profiles is dependant on how the
control system is programmed. Depending on the way the control system has
been programmed a momentary screen may be displayed when the button is
pressed.

Hazard Warning Button and LED

*)

This button activates and de-activates the wheelchair’s hazard lights. Depress
the button to turn the hazards on and depress the button again to turn them off.
When activated the hazard LED and the indicator LED’s will flash in sync with
the wheelchair’s indicators.

Lights Button and LED*)

This button activates and de-activates the wheelchair’s lights. Depress the but-
ton to turn the lights on and depress the button again to turn them off. When acti-
vated the lights LED will illuminate.

Left Indicator Button and LED*)

This button activates and de-activates the wheelchair’s left indicator. Depress the
button to turn the indicator on and depress the button again to turn it off. When
activated the left indicator LED will flash in sync with the wheelchair’s indicator.

Right Indicator Button and LED*)

This button activates and de-activates the wheelchair’s right indicator. Depress the
button to turn the indicator on and depress the button again to turn it off. When
activated the right indicator LED will flash in sync with the wheelchair’s indicator.

*)

Only if the wheelchair is provided with lights.

«
...
41
42
43
44
45
...
»

Содержание C500





































































































Отзывы:

Нет отзывов

Похожие инструкции для C500

Бренд: Invacare Страницы: 136

Бренд: HOMECARE PRODUCTS Страницы: 6

Бренд: Meyra Страницы: 104

Бренд: Quantum Страницы: 20

Бренд: Quantum Rehab Страницы: 59

Бренд: Quantum Страницы: 48

Бренд: Sunrise Medical Страницы: 19

Breezy 2000 Series Standard

Бренд: Sunrise Medical Страницы: 27

Бренд: Medicare Technology Страницы: 19

Бренд: Royale Страницы: 3

Бренд: Power Stand Страницы: 64

Бренд: Dietz SmartCare Страницы: 10

Бренд: Quantum Страницы: 44

Бренд: VELTOP Страницы: 2

1415 Self Propel Wheelchair

Бренд: Roma Medical Страницы: 13

Бренд: C.T.M. Страницы: 27

Бренд: Better Products For Disabled People Страницы: 31

Бренд: Everest & Jennings Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды