Permobil C500, Руководство пользователя

Страница: 89 / 100

Owner´s Manual Permobil C500 R-net Diagnostics
89
3.22 System Error
This occurs when the system detects a trip which cannot be attributed to a specific
module.
• Check all cables and connections.
• Cycle the power.
If the trip is still present and the system contains 3rd party Modules:
• Disconnect all the none PGDT modules and cycle the power.
If this has cleared the trip:
• Connect each 3rd party module in turn, cycling the power each time.
• If the trip reappears after one of the power cycles then the last module to
have been added to the system must be defective.
If the trip is still present after the above checks have been made, then the PGDT
control system may be defective. Refer to Section 5.
3.23 Gone to Sleep
This occurs when the control system has been left inactive for a time greater
than the parameter Sleep Timer. An entry is made in the system log each time
this occurs.
3.24 Charging
This occurs when the control system detects that a charger is connected to
either Inhibit 1 or Inhibit 3. Refer to section 2.3 for connection details.
The Battery charging screen will be displayed during charger connection.
An entry is made in the system log each time this occurs.
If an On-Board Charger is used:
• Disconnect the charger from the AC supply.
If an Off-Board Charger is used:
• Disconnect the charger from the AC wheelchair.
If the trip is still present after the charger has been disconnected then the
Joystick Module may be defective. Refer to Section 5.