Permobil C350, Руководство по обслуживанию

Страница: 30 / 68

30
Seat angle mechanism
Seat angle mechanism
Removal
1. Raise the seat; electric seat lift to the highest
position; fixed seat tube to the service position.
See page 28. If the electric seat lift does not
work normally because the batteries are dis-
charged or the adjustment device is defective,
the seat can be raised/lowered manually. See
page 26.
2. Switch off the main power switch on the con-
trol panel.
3. Remove the upper and rear chassis cover.
See page 8.
4. Remove the seat. See pages 32–35.
The seat is heavy. Two people should therefore lift it. Be care-
ful with the cabling.

NB
5. On a chassis with a VR2 control system, dis-
connect the seat angle cabling at the contact
on the output stage (see illustration below).
Cut the cable ties holding the cabling in place,
noting the position of the cable ties for subse-
quent fitting.
6. Remove the seat angle by unscrewing the four
screws. See the illustration.
7. Lift the seat angle away from the seat
tube/seat lift.
The seat angle mechanism is held in place with
four screws.
Assembly
Assemble in the reverse order.
Make sure that the hole on the seat angle is correctly positioned
against the corresponding hole on the seat lift/seat tube.

NB
Output stage cable connections (VR2).
Motor 1
Left
Motor 2
Right
Battery
Inhibit
External charg-
ing socket
Adjustment device
Control panel