Permobil C350, Руководство по обслуживанию

Страница: 28 / 68

28
Fixed seat tube
Locking screw for the seat tube height position.
Fixed seat tube
Service position
The fixed seat tube can be raised to the service
position to make it easier to set the fixed seat
height and other service tasks on the wheelchair.
1. Loosen the screw that locks the fixed height
position of the seat tube (see illustration). The
seat is now pressed upwards by the integrated
gas spring of the seat tube.
2. Lock the seat tube in the upper position using
the screw before starting any other work (see
illustration).
Adjusting the seat height
The length of the fixed seat tube can be adjusted
to five different fixed positions.
1. Adjust the seat tube to the service position
(see above).
2. Screw the height adjustment screw in place in
the desired height position. See the illustra-
tion. The three holes in positions that raise the
seat above the standard position are plugged
with plastic screws. If one of these three holes
is to be used, the plastic screw must first be
removed.
When the seat is raised above the standard
position, it is recommended that the wheel-
chair’s control system be programmed so that
the parameter for maximum forward speed is
set to 75%. This particularly applies if the
user’s weight exceeds 100 kg. For more infor-
mation concerning programming of the control
system, see page 41.
Turn the seat so that the height adjustment screw
ends up in the groove in the outer tube.
Height adjustment screw in standard position.
If the seat is raised above the standard position, it is recom-
mended that the wheelchair’s control system be programmed
so that the parameter for maximum forward speed is set to 75%.
This particularly applies if the user’s weight exceeds 100 kg.

WARNING
To return to normal position, undo the screw lock-
ing the seat tube height position, and push the
seat downwards until the head of the height
adjustment screw is in the recess in the outer tube
of the seat tube (see illustration).
Always lock the seat tube in the upper position using the
screw before starting any other work.

WARNING
The seat must not be subjected to load and the wheelchair must
not be driven with the fixed seat tube in the service position.
Make sure that the head of the height adjustment screw is in
the recess in the outer tube of the seat tube after work is
completed.

WARNING