20
Link arms
Link arm mounting
Removing/fitting the front link arm
Link arms
Removing the front link arm
1.
Switch off the main power switch on the con-
trol panel.
2.
Lift up and chock up the wheelchair chassis so
that the wheel in question is free of the ground.
3.
Remove the lower shock absorber bracket.
See page 19.
4.
Remove the cap from the side of the link arm.
See the illustration.
5.
Remove the link arm. It is held in place with a
screw and a washer. See the illustration.
For removal of wheel forks and wheels, see the
respective chapters.
Fitting the front link arm
Fit in the reverse order.
Tighten the screw holding the link arm in place
with a dynamometric wrench.
Tightening torque: 15 Nm.
Do not use an impact wrench for the tightening torque.
NB
1
Socket head cap screw ISO 4762 M8x40 8.8 Fe/Zn
5 C1
2
Washer, 8 140 HB Fe/Zn 5 C1(8.4x20x2)
3
Spacer
4
Washer, ISO 2768-m 32x8.1x3
5
Socket head cap screw ISO 7380 M8x16 10.9 Fe/Zn
5 C1
Locking Coat DIN 267-28
6
Plastic plug, Ø 38x12 (Ø32-36)
Item
Description
4
5
6
1
2
3
Содержание C350
