Perkins 904D-E28T Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 110

Perkins 904D-E28T Скачать руководство пользователя страница 22

• Engine Coolant Temperature

• Engine Oil Pressure

• Intake Manifold Air Temperature

• Intake Manifold Air Pressure

• Engine Speed Sensors

• Fuel Temperature

• Electronic Unit Injectors

• Wastegate Actuator

• Throttle Valve

• Supply Voltage to Sensors

• Fuel Pressure in Manifold (Rail)

• NOx Reduction System (NRS)

The Engine Monitoring package can vary for different
engine models and different engine applications.
However, the monitoring system and the engine
monitoring control will be similar for all engines.

Note:

Many of the engine control systems and

display modules that are available for Perkins
engines will work in unison with the Engine
Monitoring System. Together, the two controls will
provide the engine monitoring function for the specific
engine application. Refer to the Troubleshooting for
more information on the Engine Monitoring System.

22

M0108133-04

Safety Section
Engine Electronics

«
...
20
21
22
23
24
...
»

Содержание 904D-E28T















































































































Отзывы:

Нет отзывов