Illustration 52
g03331704
Typical example
3.
Remove filter element (5) and remove O ring seal
(6) and discard.
Note:
Ensure that all parts are clean and free from
dirt.
4.
Install a new O ring seal (6) onto the cap (2) and
install a new filter element (5) into the cap (2).
5.
Install cap assembly into the main body (1).
Tighten the cap assembly to 10 N·m (7 lb ft).
6.
Install hose (4) and clip (3). Remove the container
and clean away any split fluid.
i05153374
Diesel Particulate Filter - Clean
Wear goggles, gloves, protective clothing, and a
National Institute for Occupational Safety and
Health (NIOSH) approved P95 or N95 half-face res-
pirator when handling a used Diesel Particulate
Filter or Catalytic Converter Muffler. Failure to do
so could result in personal injury.
The muffler, catalytic converter/muffler, and diesel
particulate filter will become extremely hot during
engine operation. A hot muffler, catalytic convert-
er/muffler and diesel particulate filter can cause
serious burns. Allow adequate cooling time be-
fore working on or near the muffler, catalytic con-
verter/muffler and diesel particulate filter.
Illustration 53
g02335296
Typical example
Note:
Improper cleaning or repair of the Diesel
Particulate Filter (DPF) can damage the DPF and the
engine aftertreatment system. Contact your Perkins
dealer for more information.
The DPF is enclosed within the assembly (1). For
information on removal of the DPF, refer to
Disassembly and Assembly, “DPF - Remove”.
84
SEBU8609
Maintenance Recommendations
Diesel Particulate Filter - Clean