PerkinElmer STA 8000, Инструкция по установке и эксплуатации оборудования

Страница: 49 / 64

Install an STA 8000 . 49
Configure the STA 8000
The Pyris software must be configured for the STA 8000. This must be done before the
STA 8000 Application can be recognized.
1. Select
Pyris Config
from the Pyris group under PerkinElmer Applications in the
Programs menu accessed from the Start button.
OR
Select
Configure Analyzer
from the Pyris Manager Start button menu.
The Pyris Configuration dialog box appears on the screen.
2. Click the
Add Analyzer
button.
The Add Analyzer dialog box appears.
3. From the list of available ports, select the port to which you connected the analyzer.
Remember that COM5 appears when an analyzer is connected to port 1 of an EdgePort
USB Converter.
4. Click the
Add
button.
The STA 8000 Configuration dialog box is displayed. The system detects the type of
analyzer that is attached and displays the default name and other information for an
STA 8000 in this dialog box.
5. Select the accessories that are attached to the analyzer.
6. Click
OK
to accept the selections.
7. Click
OK
to exit the Configuration dialog box.
OR
Select
Add Analyzer
to add another analyzer to the configuration.
Remember that the analyzer must be connected to the communications port and
switched on, otherwise it will not be recognized by the Pyris software.