PerkinElmer STA 8000, Инструкция по установке и эксплуатации оборудования

Страница: 42 / 64

42 . STA 8000 Installation and Hardware Guide
Removal of the Shipping/Alignment Tool
The STA 8000 is shipped with a tool inserted through the furnace into the balance
mechanism to minimize vibration during transportation. This tool is also used to align the
system after replacing a furnace or balance. It is important that you keep this tool in a safe
place. It is also recommended that you save the shipping foam should the analyzer require
shipment to another facility in the future.
1. Remove the furnace cover and the foam inserts.
2. Grip the upper part of the shipping/alignment tool using flat tweezers and carefully lift it
straight upwards and out of the furnace.
To replace the shipping/alignment tool:

Insert the tool into the hole in the bottom of the furnace.
The flat plate must be pointing towards the front of the analyzer.
To prepare the analyzer for shipment:
1. Position the two-part foam insert on top of the shipping/alignment tool within the
furnace.
2. Place the cylindrical foam insert on top of the first foam insert.
3. Replace the furnace cover and tape it shut.
Install the Sensor
1. Switch on the STA 8000.
2. Ensure that the shipping/alignment tool is removed.
CAUTION
ATTENTION
The STA 8000 sensor is a fragile part due to the breakable ceramics
used, and must be handled with care. Until the sensor is placed in the
analyzer, it should be kept in its box.
Le capteur STA 8000 est une partie fragile en raison de la céramique
cassable utilisée et doit être manipulé avec précaution. Jusqu'à ce que le
capteur soit placé dans l'analyseur, il doit être conservé dans sa boîte..
3. Remove the sensor from its box.
Avoid touching it with bare hands.
4. Using the pointed tweezers provided (P/N 09908400), grip the sensor by the thicker
area at the top of the rod.