PerkinElmer Photovac MicroFID, Руководство пользователя

Страница: 78 / 170

MicroFID Software Manual
9. The instrument status will now be “Sample ”. Ta ke a sample
measurement, as specified in the Method 21 protocol. When
you have an accurate sample, press ENTER. MicroFID will
record the maximum sample concentration when you press
the ENTER key.
10. The instrument status will again be Locate. At this time,
since there are no other locations stored in the datalogger
the same event will be displayed.
11. Press EXIT at anytime to return to the beginning of the
current event and repeat the readings.
12. To store the next location, go the next site and press the
EVENT key. Select “Insert” or “Scan ” to enter an event
name.
13. Press the CAL key and select the calibration memory to be
used for this site.
14. Press SETUP and enter a repair code for this location.
15. When you return to the default display, the instrument
status will be “ Locate” . Record a background and sample
reading for this site. You will now have two events
recorded in the datalogger.
16. Repeat this procedure for all sites that must be monitored.
You can record data for up to 250 sites.
17. Once all event entries have been recorded in the datalogger,
you may want to download them to a computer to perform
your own calculations.
76