PerkinElmer Photovac MicroFID, Руководство пользователя

Страница: 21 / 170

Introduction
WARNING
If the MicroFID you are using is not specifically identified as
intrinsically safe, do not use it in a location were flammable
concentrations of gases and vapors may exist.
Compressed Gases
Cylinders of compressed gas, such as hydrogen and calibration gas,
must be handled with extreme care. When using the calibration gas
bag adapter, take care not to kink or stress the tubing. For safety, the
hydrogen and calibration gas cylinders must be secured before use.
Please observe the following handling procedures:
•
Do not mutilate cylinders.
•
Do not expose the cylinders to direct sunlight.
•
Do not heat the cylinders. The cylinders may rupture at high
temperatures.
•
Use only the specified regulator for the calibration gas. Confirm
regulator type and material with your specialty gas supplier.
Use only the MicroFID refill adapter for the hydrogen (Part No.
MX396004).
•
Always secure cylinders before removing the cylinder valve
protection cap
•
Do not drag or roll cylinders. Use a cylinder hand truck to move
large cylinders.
•
Wear safety glasses when working with compressed gases.
•
Store cylinders in an upright position.
•
Do not store cylinders in a hazardous location.
19