PerkinElmer Photovac MicroFID, Руководство пользователя

Страница: 61 / 170

Tutorial Session
3. Turn MicroFID on and press the SETUP key to set the
range for the graph. Use the ARROW keys to select the
20, 200, 2000, 10,000 or 50,000 ppm range.
4. Press the GRAPH key and then the SETUP (*) key to
select the desired setup options.
5. MicroFID will ask for the start and stop events. Enter
the desired event and press ENTER. Use the ARROW
keys to scroll through the list of events to select the
start event and then to select the stop event.
6. Enter an ID number if desired. Any number up to 16
digits long may be entered as an ID number.
The ID number can be used, for example, to
differentiate between users or instruments. If more than
one person is using a single instrument, each person can
use an individual number for printed reports. If more
than one MicroFID is being used, each instrument can
have its own ID number on printed reports.
If an ID number is not required, leave this option blank
and move onto the next option by pressing ENTER.
7. Enter the baud rate. This value is specific to the printer
being used and must be set correctly. Refer to the
printer user’ s manual to determine the correct baud rate.
8. Enter the parity. The parity is specific to the printer
being used and must be set correctly. Most printers will
have parity set to none.
9. When the setup is correct, ensure the printer is on­line
and press ENTER.
MicroFID stores one set of readings (Min, Avg and Max) for each
averaging interval. In each averaging interval the graphed minimum
is the minimum of all the stored readings in that interval. The
graphed Avg is the average of all the recorded average readings and
the Max is the maximum of all the recorded maximum readings. In
59