Dispensing Runs
22
P/N CLS155330 Rev. A
FlexDrop iQ User Manual
PerkinElmer, Inc.
Starting the Dispense Protocol
To run the dispensing protocol:
1. After the dispensing protocol is set up, prepare the source plate with
respective liquids.
2. Click
Start Dispensing.
The FlexDrop iQ software prompts you to insert
the source plate into the upper tray and the target plate into the lower tray
of the device.
Figure 17. Dispense Screen – Dispense Protocol
3. To pause the protocol at any time during the run, click the
Pause
button.
4. To stop the protocol at any time during the run, click the
Abort
Dispensing
button. Source wells might have to be refilled with liquid and
the target plate must be exchanged before starting the next run.
