Dispensing Runs
17
P/N CLS155330 Rev. A
FlexDrop iQ User Manual
PerkinElmer, Inc.
Edit Wellgroups
To edit a wellgroup, select the wellgroup in the list on the left side of the
screen. Click in the wellgroup on the target plate layout to be edited. Blue
squares display in each corner of the area.
Change the size of an area by hovering on a blue square until the square
turns red, and then click and drag to the desired size.
Change the position of the whole wellgroup by clicking in the middle of the
wellgroup, and then click and drag to the desired position on the target plate.
Remove selected wells by dragging them to the bin icon (see Figure 11) or
pressing the “Del” key on the keyboard.
Figure 11. Editing Wellgroups on the Target Plate
