Dispensing Runs
19
P/N CLS155330 Rev. A
FlexDrop iQ User Manual
PerkinElmer, Inc.
Selecting the Source Plate
After the target layout is defined, click the Source Layout tab to specify the
Source Plate and Source Well Volume.
Figure 13. Add Source Plate Window
The following items can be edited:
•
Optional: Enter a
Plate Identifier
.
•
Optional: Add the
Plate Barcode ID
.
•
Select the source
Plate Type
.
Click
Ok
to proceed.
NOTE:
Edit the Source plate properties by clicking the
Edit button in the
Source Layout window.
To add additional source plates, click the Add button on the top
of the Source Layout window.
All liquids and the minimum required volumes for dispensing used in the
protocol are listed on the left side of the screen in the Unassigned liquids
section (see Figure 14).
