PerkinElmer 200 UV/VIS Series, Руководство пользователя

Страница: 84 / 177

Using Method Mode Viewing the Method Screen
4 - 4
The Parts of the Method Status Screen
The following figure identifies the method status, and some parts of the Method Screen.
The following table describes the parts of the Method Screen.
Number
Part of the
Screen
Description
1 Method Name Allows up to eight characters to identify the method. The
method name is optional.
2 Method Number The number that identifies the method.
3 Method Status One of the following appears:
STORD: Indicates the method is stored in memory.
CHNGD: Indicates a method value has changed. This
remains displayed until you store the method.
This field is blank when you are creating a new method.
4 Detector Status One of the following appears:
NTRDY: Indicates Not Ready. This status appears when
the detector is not ready to run, for example when the
lamp is off.
READY: Indicates Ready. This status appears when the
detector is ready to run a method.
RUNnn: Indicates Running. This status appears when
the Detector is running.
STOPD: Indicates Stopped. This status appears when the
Stop key has been pressed while a method was running.
5 Sequence Status Displays the sequence status. In the figure above the
sequence status is S01.000. The “S” indicates “Sequence.”
The “01” indicates the current set, and “000” indicates the
current injection.
2
1
3 4
5
7
8
6