PerkinElmer 200 UV/VIS Series, Руководство пользователя

Страница: 108 / 177

Using Sequences Setting up a Sequence
5 - 8
Setting up a Sequence
You can use the LINK command to set up the sequence. The LINK command makes the
selected sequence the current, active sequence. Only one linked sequence is allowed. A
sequence many contain one or more Sets. A Set is the combination of a method number and
the number of injections. A linked sequence requires that you press the Run key to run each
injection in the sequence. A linked method cannot be edited.
After you press , the system asks if you want to turn the
lamp off at the end of the sequence. If you answer Yes, the
lamp set up screen displays at the end of the sequence.
Press
to turn the lamp back on.
To set up the sequence, press F6 . When you link the sequence, its status
changes to LINKD, and the first method in the sequence becomes the active method.
LINK
F1
F6
F8
SEQUENCE SCREEN
LINK
return