Peri InSite Construction Скачать руководство пользователя страница 14

Страница: 14 / 52

PERI InSite Construction -

Data Acquisition System

Instructions for Installation and Use - Technical Cabinet with Main Unit and Nodes – Preliminary Draft –

Explanation of

graphical symbols

2.3 Potential Health Consequences

Under normal operation of The System there are no health consequences to take into

consideration.

2.4 Personal Protection

In case of The System is mechanically damaged or any release of leakages, the following

safety equipment must be used,

Symbol

Meaning

RoHS

Restriction of Hazardous Substances. The components

used in the manufacturing of The System have RoHS

compliance.

"Conformité Européenne" French for European Conformity

WEEE

European Waste Electrical and Electronic Equipment

Directive means that The Technical Cabinet and all its

parts must be recycled according to the local (the country

system being used) regulatory law.

CSA

The technical Cabinet is tested according to CSA Group´s

Industrial Control Panel (ICP) standards.

The technical cabinet have compliance with product safety

standards of Underwriter Laboratories.

TUV

The technical cabinet have product quality testing

certification by TUV. “Technischer Überwachungsverein”

German for

Association for Technical Inspection.

PPE

Instruction

Eye protection

Use goggles or glasses.

Hand protection

Synthetic rubber or cloths gloves, no direct contact in case of fire.

Hearing protection

Use safety earbuds from harmful noise level.

Protective shoes

Protect the feet from piercing and heavy elements.

Содержание InSite Construction





















































Результаты поиска

Содержание InSite Construction

Отзывы:

Peri InSite Construction, Инструкция по установке и эксплуатации, Страница: 14 / 52

Результаты поиска

Содержание InSite Construction

Отзывы: