Performax 241-0916 Скачать руководство пользователя страница 6

6

3) PERSONAL SAFETY

 

 

Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use the tool while tired or under the 

influence of drugs, alcohol, or medication. 

A moment of inattention while 

operating power tools may result in serious personal injury.

 

 

Use personal protective equipment. Always wear eye protection. 

Protective equipment such as dust mask, non-skid safety shoes, hard hat, 

or hearing protection used for appropriate conditions will reduce personal 

injuries.

 

 

Prevent unintentional starting. Ensure that the switch is in the OFF 

position before connecting it to a power source and/or battery pack, 

picking up or carrying the tool. 

Carrying power tools with your finger 

on the switch or energizing power tools that have the switch on invites 

accidents.

 

 

Remove any adjusting key or wrench before turning the power tool 

on.

 A wrench or a key left attached to a rotating part of the power tool may 

result in personal injury.

 

 

Do not overreach. keep proper footing and balance at all times. 

This 

enables better control of the power tool in unexpected situations.

 

 

Dress properly. Do not wear loose clothing or jewelry. keep your hair, 

clothing and gloves away from moving parts. 

Loose clothes, jewelry or 

long hair can be caught in moving parts.

 

 

If devices are provided for the connection of dust extraction and 

collection facilities, ensure that these are connected and properly 

used. 

Use of these devices can reduce dust-related hazards.

4)  POWER TOOL USE AND CARE

 

 

Do not force the power tool. Use the correct power tool for your 

application. 

The correct power tool will do the job better and more safely at 

the rate for which it was designed.

 

 

Do not use the power tool if the switch does not turn it on and off.

 Any 

power tool that cannot be controlled with the switch is dangerous and must 

be repaired.

 

 

Disconnect the plug from the power source and/or the battery pack 

from the power tool before making any adjustments, changing 

accessories, or storing power tools. 

Such preventive safety measures 

reduce the risk of starting the power tool accidentally.

 

 

Store idle power tools out of the reach of children and do not allow 

persons unfamiliar with the power tool or these instructions to operate 

the power tool. 

Power tools are dangerous in the hands of untrained users.

Содержание 241-0916

























Отзывы: