12
UNPACkING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
PACkING LIST
Hammer drill, 1pc auxiliary handle, 1pc Lithium-Ion battery pack, 1pc charger,
1pc double end bit and Operator’s Manual
OPERATION
BATTERY PROTECTION
To protect the battery from damage and prolong its life, the battery pack’s
circuitry will turn off the battery pack if it becomes overloaded or if the
temperature becomes too high during use. This may happen in extremely high
torque, binding and stalling situations. The battery pack will begin normal
operation when it cools down.
NOTICE:
A significantly reduced run time after fully charging the battery pack
indicates that the batteries are near the end of their usable life and must be
replaced.
COLD WEATHER OPERATION
When the battery pack is very cold, it may “pulse” for the first minute of use to
warm itself. Put the battery pack on a tool and use the tool in a light application.
After about a minute, the battery pack will have warmed itself and will operate
normally.
WHEN TO CHARGE THE BATTERY PACk
The Lithium-Ion battery can be charged at any time and will not develop a
“memory” when charged after only a partial discharge. It is not necessary to
run down the battery pack charge before recharging. Remove the battery pack
from the tool when convenient for you and your job.
You can “top-off” your battery pack’s charge before starting a big job or long
period of use.
Due to Lithium-Ion’s fade-free properties, the only time it is necessary to
charge the Lithium- Ion battery pack is when the pack has reached the end
of its charge. To signal the end of charge, power to the tool will drop quickly.
Charge the battery pack as needed.
