15
TO DETACH BATTERY PACk (Fig. 4)
1. Lock the trigger switch on the drill by placing the direction of rotation
(forward/center lock/reverse) selector in center position.
2. Depress the battery release buttons located on the front of the battery pack
to release the battery pack.
3. Pull forward on the battery pack to remove from the tool.
TRIGGER SWITCH (Fig. 5a)
To turn the drill ON, depress the trigger
switch. To turn it OFF, release the trigger
switch.
VARIABLE SPEED (Fig. 5a)
The variable-speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure.
DIRECTION-OF-ROTATION SELECTOR
(FORWARD/CENTER LOCk/REVERSE)
(Fig. 5b)
The direction of bit rotation is reversible
and is controlled by a selector located
above the trigger switch.
With the drill held in normal operating
position:
1. Position the direction of rotation
selector to the left of the tool for forward rotation.
2. Position the direction of rotation selector to the right of the tool for reverse
rotation.
3. Setting the switch in the OFF (center lock) position helps reduce the possibility
of accidental starting when the tool is not in use.
NOTICE:
To prevent gear damage, always allow the chuck to come to a complete
stop before changing the direction of rotation.
NOTICE:
The hammer drill will not run unless the direction of rotation selector is
engaged fully to the left or right.
ELECTRIC BRAkE
To stop the hammer drill, release the trigger switch and allow the chuck to
come to a complete stop. The electric brake quickly stops the chuck from
rotating. This feature engages automatically when you release the trigger
switch.
Fig. 5a
Direction-
of-rotation
selector
Variable-speed
trigger switch
Fig. 5b
FORWARD
REVERSE
