Performax 241-0916 Скачать руководство пользователя страница 13

13

HOW TO CHARGE THE BATTERY PACk
NOTICE:

 This Lithium-Ion battery pack is shipped partially charged. Before using 

it the first time, fully charge the battery pack.
A fully discharged battery pack will charge

 

about 60 minutes in a surrounding 

temperature between 41° F (5

o

C) and 122° F (50

o

C).

1.    Charge the Lithium-Ion battery pack 

with the correct charger.

2.    Connect the charger to a power supply.
3.    Attach the battery pack to the Charger 

by aligning the raised ribs of the 
battery pack with the slot in the 
Charger. Slide the battery pack onto 
the Charger (Fig. 2).

4.    The Charger will communicate with 

the battery pack’s circuitry to evaluate the condition of the battery pack.

5.    During normal charging, the green LED on the charger will flash 

continuously.

6.     After charging is complete, the green LED on the Charger will be on.
7.    The battery pack will fully charge, but will not overcharge, if left on the Charger.

LED FUNCTIONS OF CHARGER (Fig. 3)

LED INDICATOR

BATTERY 
PACK

RED LED

GREEN 
LED

ACTION

DEFECTIVE

BATTERY

BATTERY

CHARGING

BATTERY

FULL

HI / LO TEMP.

Hot/Cold 
battery

On

Off

Fast charge will begin 
when battery returns to 
desired temperature.

DEFECTIVE

BATTERY

BATTERY

CHARGING

BATTERY

FULL

HI / LO TEMP.

Defective Flashing Off

Battery pack or charger 
is defetive

DEFECTIVE

BATTERY

BATTERY

CHARGING

BATTERY

FULL

HI / LO TEMP.

Charging Off

Flashing Charging

DEFECTIVE

BATTERY

BATTERY

CHARGING

BATTERY

FULL

HI / LO TEMP.

Fully 
charged

Off

On

Charging is complete

CHARGING A HOT BATTERY PACk

If the battery pack is above normal temperature range, the red LED on the 

charger will turn on and the green LED will be off. When the battery pack cools 

down to approximately 122°F (50°C), the charger will automatically begin fast 

charge mode.

WA

RN

IN

G!

Li-io

n

Model #: 252-0908

Risk of fire, explosion, and burns. Do not

 

disassemble, crush, heat above 212°F o

incinerate. Keep battery out of re

ach of children. 

Use only with charger 252-0912.

Made in China

100520

Customer Service: 1-866-858-2664

BATTE

RY CHARGER

Fig. 2

Содержание 241-0916

























Отзывы: