Performance Motion Devices CME N Series, Руководство пользователя

Страница: 48 / 70

48 ION/CME N-Series Digital Drive Developer Kit User Manual
3
* With the pre-assembled DKs the ION unit, interconnect DK PCB, base plate, thermal pad, and mounting screws are all pre-assembled
together and the ION unit is soldered into the PCB. With the non pre-assembled DKs the N-Series ION unit is not included and the
components are provided without being assembled together. For instructions on assembling a complete N-Series ION DK stack refer to
Section 3.5, “Component Developer Kit Assembly.”
** ION unit not included with non pre-assembled DKs
*** Allen key not included with pre-assembled DKs
3.2.4 Additional DK Accessories
The table below lists additional components that may be useful when working with N-Series ION DKs.
Ethernet cable N/A Standard 6' Cat 6 Ethernet connector
cable
Allen key*** N/A 1.5 mm Allen key
Name
Vendor & P/N Description
USB to CAN FD connector Ixxat, P/N: 1.01.0353.22012 USB to CAN FD connector, RJ45 interface.
See
Section 2.1, “Activating CAN Communi-
cations,” for more information on the use of
this cable.
Dual serial channel cable PMD, P/N: Cable-4355-01.R Male DB9 dual serial to two single-channel
female DB9 cable. See
Section 2.2, “Activating
Serial Communications,” for more informa-
tion on the use of this cable.
Host SPI connector interface
cable PMD, P/N: Cable-6001-01 Adapter cable for NI USB-8452 to J8 DK con-
nector. See
Section 2.4, “Activating SPI Com-
munications,” for more information on the
use of this cable.
SPI interface converter module &
cable National Instruments,
P/N: NI USB-8452 USB to SPI converter module and associated
cable. See
Section 2.4, “Activating SPI Com-
munications,” for more information on the
use of this converter module & cable.
Name PMD P/N Description