PERFECT FRY COMPANY PFC570-HB, Руководство по установке и эксплуатации, Страница: 16 / 36

16
EQUIPMENT SET-UP AND CLOSE PROCEDURES
CLEANING (continued)
Cleaning - When cooking oil is disposed(continued) :
CAUTION: Keep the electrical box on the heater module coils away from water. The heater
box must NOT be immersed in water or other solutions. Do not spray the male connector.
13. Remove the coils and scrub the coils with a KAY® Hi-Temp Pad. If heavy build-up occurs and
it is difficult to remove soil from in between the coils, use the KAY® Hi-Temp Detail Brush Head
(cleaning tool head that is part of the fryer cleaning tools with white bristles) to scrub inside the
coiled areas. Rinse off the coils with hot , fresh water. Allow to air dry.
14. Scrub the interior and exterior of the oil vat with a KAY® Hi-Temp Pad. Rinse with hot, fresh
water then sanitize in SolidSense™ Sanitizer solution for 1 minute. Allow to air dry.
15. Remove the spill tray from the fryer and drain any oil that has accumulated. Take the spill tray
to the 3-compartment sink to wash in APSC solution. Rinse the spill tray in hot, fresh water then
sanitize in SolidSense™ Sanitizer solution for 1 minute. Allow to air dry.
NOTE: Place the Yellow Protective Cover that comes with the fryer unit, back on top of
the female connector at the interior back of the unit behind the vat before interior cabinet
cleaning begins. Do not spray the female connector.
16. With the interior components removed from the fryer, clean the interior of the fryer and the front
panel door with a clean, sanitizer-soaked towel sprayed with KAY® QSR HDD solution and wipe
until clean. Rinse with a separate clean, sanitizer-soaked towel.
17.Spray countertop with KAY® QSR HDD solution. Discard the soiled towel in the soiled towel
bucket after use.
18.Clean the exterior of the fryer equipment by spraying a clean, sanitizer-soaked towel with KAY®
QSR HDD solution then wipe clean. If polishing is needed for the exterior fryer, spray a clean paper
towel with KAY® Specialty Cleaner & Polish and wipe the exterior until dry.
19.After cleaning is complete, remove the Yellow Protective Cover from the female connector body.
NOTE: Return the Yellow Protective Cover to its holding area in the upper cabinet for storage.
2 0.Ensure that the blow-off caps on fire extinguisher nozzles are kept in place .
21.Re-install the clean parts inside the fryer (see assembly instructions).