Perenio Power Link Скачать руководство пользователя страница 43

 Installation and Operation Manual     

for Perenio® Power Link Devices

 

 

 

©Perenio IoT spol s r.o. All rights reserved 

 

Doc Version: 1.4.3 

 

Page 43 of 49

 

 

4 Warranty Obligations 

The warranty period for the Perenio® Power Link device shall be Twenty-Four (24) 
months
 from the date of sale to the End User. 

The Warranty Card shall be deemed valid provided that it is correctly and completely 
filled in by the Seller. Upon the purchase, the Customer shall check that both the Serial 
Number  and  the  Model  name  of  the  device  correspond  to  those  indicated  in  the 
Warranty Card. 

Incomplete  or  illegible  Warranty  Card  shall  be  deemed  not  valid.  In  this  case,  it  is 
recommended to contact the Seller and ask for a duly filled in Warranty Card. It shall 
be  also  allowed  to  provide  the  original  of  the  sales/cashier’s  receipt  or  such  other 
documentary evidence of the fact and the date of sale of the device. The date of sale 
shall be the date indicated on the sales/cashier’s receipt or other relevant document. 
If the date of sale is not possible to be determined, the start of the warranty period 
shall be the date of manufacture of the device. 

The Manufacturer shall guarantee that all materials, components and assemblies of 
Perenio® devices are free from defects under normal operation within the warranty 
period. The limited warranty shall be applied to the first End Customer of Perenio® 
devices only and cannot be transferred to a subsequent customer. 

For warranty replacement, the  device must be returned to the Seller along with  its 
receipt. Warranty obligations for Perenio® devices shall be provided in the country 
of their purchase only. 

WARRANTY SERVICE PROCEDURE 

In the case of any alleged defect or deficiency of the device detected, the Customer 
shall contact the Authorized Service Center before the warranty period expiration and 
provide the following: 

1.

 

The device with an alleged defect or deficiency. 

2.

 

The  Warranty  Card  filled  out  in  accordance  with  the  applicable  legal 
requirements, or the original of the document confirming the purchase of the 
device, including clear indication of the name and the address of the Seller, as 
well as the date when this device was sold. 

LIMITATION OF LIABILITY 

Perenio® devices SHALL NOT BE SUBJECT TO a free warranty service in the case of 
identification of at least one of the following damages or defects: 

Содержание Power Link


















































Отзывы: