Perenio Power Link, Инструкция по установке и эксплуатации

Страница: 15 / 49

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.4.3
Page 15 of 49
Safe Operation Conditions
1. The device shall be installed indoors only.
2. Do not plug the device into other smart plugs in the mains.
3. Users shall observe storage/transportation conditions, as well as the operating
temperature mode of the device as declared by the Manufacturer. Do not use
the device in rooms with high humidity or extreme temperature variations.
4. When installing the device, Users shall provide for a gap of at least 10 cm wide
on each side of the device to ensure its adequate ventilation at the place of
installation (Do not cover the device with newspaper, tablecloth, curtains, etc.)
5. The device may be plugged into the power source, only if the mains voltage
matches the value indicated on the device casing and/or specifications.
6. Do not immerse the device in water or other liquids due to the risk of fire and/or
electric shock.
7. Keep the device away from open flame sources and hot surfaces.
8. Users must not drop, throw or bend the device or attempt to repair the device
on their own.
9. In order to avoid personal injury, it shall not be allowed to use the cracked or
in any other way damaged device.
10. Use dry cloth or cloth soaked in a small amount of water for cleaning (don’t
use harsh chemicals/cleaning agents). The device must be powered off before
cleaning.
11. Children shall not be allowed to use the device unsupervised and/or play with
it.
12. It is not recommended to use the device by persons with physical or mental
disabilities, unless they are under proper supervision or were properly
instructed on possible hazards and safe usage of the device.
ATTENTION! Faulty wiring and excessive mains voltage can cause electric shock.
There is a danger of burns because the device becomes hot during operation! Let
the device cool down completely.