Perenio Power Link, Инструкция по установке и эксплуатации

Страница: 11 / 49

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.4.3
Page 11 of 49
Indicator Status Description
Blinks The device is switched on*, but not activated in
the Perenio Smart app or Apple HomeKit app
Dark-blue Flashes The device is switched off**, but activated in the
Perenio Smart app
Blinks The device is switched off** and not activated in
the Perenio Smart app or Apple HomeKit app
Pale-blue Flashes The device is switched off**, but activated in the
Apple HomeKit app
Red Blinks An error occurred, or overload protection was
activated
Green-yellow-
red Flashes The device is activated in the Perenio Smart app
and consumes energy. The color changes
smoothly depending on the current strength –
from 0A (Green) to 16A (Red)
Blinks The device is activated in the Apple HomeKit app
and consumes energy. The color changes
smoothly depending on the current strength –
from 0A (Green) to 16A (Red)
* “The device is switched on” means that the power plug is connected to the source of power and supplies
energy to an appliance plugged into it.
** “The device is switched off” means that the power plug is connected to the source of power, but does not
supply energy to an appliance plugged into it.
NOTE. If the device is activated in the Perenio Smart app, you will not be able to
connect it via Bluetooth in Apple HomeKit until it is switched to the MFi mode.