CFAN0125 - CFAN0130 - CFAN0140
26.11.2010
©Velleman nv
4
5.
Overview
Refer to the illustrations on page
2
of this manual.
1
front grille
6
control buttons
2
fan blade locking nut
7
motor assembly
3
fan blade
8
oscillation knob
4
rear grill locking nut
9
power cord
5
rear grille
6.
Mounting instructions
Refer to the illustrations on page
2
of this manual.
Note:
Never
use the fan without the safety grill in place.
•
Place the rear grille
[5]
on the motor assembly
[7]
(pins must fit in corresponding holes) and secure
it with the locking nut
[4]
.
•
Place the fan blade
[3]
over de motor shaft (pins must rest in slots) and secure it with the locking
nut
[2]
.
•
Place the front grille
[1]
on the rear grille
[5]
, place the plastic grille clamp over the grille edges and
tighten it with the screw.
Tip:
place the grille clamp over the rear grille and turn the screw 2 turns. Then gently push the front
grille in place and tighten the screw.
7.
Operating instructions
Refer to the illustrations on page
2
of this manual.
•
Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into
the rear of the fan.
•
Insert the power plug
[9]
into the mains.
•
Adjust the tilt angle by pushing the grille.
•
Set the desired output speed via the control buttons:
CFAN0125
0…STOP
1…LOW
2…HIGH
CFAN0130 – CFAN0140
0…STOP 1…LOW
2…MEDIUM
3…HIGH
•
Push down the oscillation knob
[8]
to make the fan oscillate. Pull up the oscillation knob
[8]
to fix
the fans’ position.
•
Always switch off the fan before moving it.
•
Switch off and unplug from the mains after use.
8.
Cleaning and maintenance
•
Disconnect the device from the mains prior to maintenance activities.
•
Clean out the parts with a soft and dry cloth. Remove stains with a damp cloth and some mild soap.
Remove soap remnants with the damp cloth.
Do not
use abrasives.
•
Make sure no water or any other liquid enters the motor assembly
[7]
or the control buttons
[6]
.
•
Keep the ventilation holes of the motor assembly
[7]
free from dust at all times.
9.
Technical specifications
CFAN0125 CFAN0130 CFAN0140
power
30W 40W 50W
Ø
fan
25cm 29cm 39cm
airflow >
24m³/min.
>
34m³/min. >
54m³/min.
height
40cm 47cm 58cm
weight
1650g 2700g 3450g
power supply
230Vac/50Hz
oscillation arc
65°
max. ambient temp
50°C
power cord length
1.5m
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
