Pereko KSM 17, Руководство по эксплуатации и обслуживанию

Страница: 81 / 104

CONNECTION
9
CONNECTION WITH ecoMAX850 SERIES CONTROLLERS
Modules of ecoMAX850P2 controllers are equipped with just one COM
transmission socket in RJ14 standard which a control panel (located inside or
outside the controller housing) is connected to. Using one RJ14 socket in the
module requires connecting an additional divider (telephone RJ14 tee separator)
and additional cable.
ecoMAX850P1 or ecoMAX850D1 controller
modules are equipped with an additional COM
transmission socket to connect RJ14 plug of
ecoLINK2
interface without using any
adapters. Just unscrew the controller housing
and put the plug into a
COM socket.
1 – COM socket (place of plugging a RJ14
interface plug),
2
– a socket with connected plug of the
control panel,
3
– controller housing cover (possible place
where a control panel can be assembled)
Standard divider, RJ14 telephone
divider, where:
1- connection of RJ14 ecoLINK2
interface plug,
2- connection of the control panel
plug,
3- Connection of an additional cable
with two RJ14 terminals.
Standard RJ14 telephone cable
with an option of connecting
wires and a method of connecting
into the divider.