Page 2
Phoenix 104 Vehicle and Forklift Computer Installation Manual
Percon Incorporated
28877 Fox Hollow Road
Eugene, OR 97405
U.S.A.
www.percon.com
The information contained herein is provided solely for the purpose of allowing customers to Install, operate, configure, and develop
applications for Percon-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written
permission of Percon Incorporated.
Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment
on the part of Percon Incorporated.
© 2009 by Percon Incorporated. All rights reserved.
The word Percon, Phoenix, and the Percon logo, are either trademarks or registered trademarks of Percon Incorporated
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, WindowsCE, and the WindowsCE logo are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
FCC Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This
equipment generates, uses and can radiate radio frequency energy. If not
installed and used in accordance with this user's manual, it may cause
harmful interference to radio communications. Note that even when this
equipment is installed and used in accordance with this user's manual,
there is still no guarantee that interference will not occur. If this equipment
is believed to be causing harmful interference to radio or television
reception, this can be determined by turning the equipment on and off. If
interference is occurring, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to a power outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio technician for help
DP_P104_Inst Rev A
