Certificate & Operation Manual
14
−
"Source direction:"
– "1" or "2"
(depending on the passage direction that is
controlled by the card capture reader),
−
"Receiver type:"
– "Activate output",
−
"Receiver number:" - "1" -
(number of the output that is physically connected to the
“Capture card” input of the card capture reader),
−
"Response characteristic:"
– "Response time":
4.
Any free input of the controller can be used for receiving the “Alarm” signal sent by the card
capture reader. It is necessary to set the type of response on the activation of this input, for
example, activate alarm output:
5. Temporary cards for visitors can be issued in
"Access"
→
"Users"
section of the Web-
interface. When adding a new user:
•
on the
"General rights"
tab
select
"Visitor"
value for the
"Type"
parameter,
•
on the
"Individual rights"
tab for the OD controlled by the card capture reader, set the
appropriate access rights and verification criteria for the visitor, while for the
"Verify from
external verification device:"
parameter set the value
"Yes"
,
while the value of the
"Blocked:"
parameter for this set of rights should be
"No"
.
Содержание FP-01C
Страница 21: ......
