http://www.pepwave.com
31
Copyright © 2010 Pepwave
User Manual
Pepwave OfficePoint Series
7.2.5
Advanced
Wireless Networks Details -Advanced
Data Rate
There are two options on data rate:
Fixed
,
Auto
Fixed will forced all data packets to be transmitted into the selected transmit
rate. Auto will automatically select the best transmit rate with a condition to
use the selected transmit rate as the minimum auto transmit rate.
Multicast Filter
This setting enables the filtering of multicast network traffic to the wireless
SSID.
Multicast Rate
This setting specifies the transmit rate to used for sending multicast network
traffic.
DHCP Relay
The OfficePoint will forward DHCP requests to a specified DHCP Server. This
option prevents broadcast messages from being propagated on the Ethernet
segment. Upon selecting this option, the DHCP Server IP address (or DHCP
Server settings) will be prompted.
Default VLAN ID
This setting specifies the VLAN ID to be tagged on all outgoing packets
generated from the virtual AP (i.e. packets that travel from the Wi-Fi segment,
through the Pepwave OfficePoint unit to Ethernet segment via the LAN port).
If
802.1x
is enabled and a
per-user VLAN ID
is specified in the
authentication
reply from the Radius server
, then the value specified via Default VLAN ID will
be overridden.
The default value of this setting is 0. That means VLAN tagging is disabled
(instead of tagged with zero).
