http://www.pepwave.com
17
Copyright © 2010 Pepwave
User Manual
Pepwave OfficePoint Series
Domain Name
Domain name can be set for wireless clients to have a readable name for the
web management.
Keep Default IP
With this option disabled, default IP
192.168.0.3
of the device will be disabled.
IP Address Mode
The options are
Automatic
and
Manual
.
Automatic
: IP address of the Pepwave OfficePoint unit is acquired from a
DHCP server on the Ethernet segment.
Manual
: A user-specified IP address is used.
PPPoE
: IP address is obtained through PPPoE. PPPoE is only supported on
Router
mode, please refer to the below table:
System Settings - Advanced
for more details.
IP Address Mode – Manual
Static IP Address
This specifies the unique IP address for the Pepwave OfficePoint unit to
communicate on the Ethernet segment.
This IP address is distinct from the admin IP address 192.168.0.3 on the
Ethernet segment.
Subnet Mask
This setting specifies the subnet mask of the Pepwave OfficePoint unit.
Default Gateway
This setting specifies the default gateway of the Pepwave OfficePoint unit.
DNS Server
This is the DNS server address to be used by the Pepwave OfficePoint unit for
resolving host names.
IP Address Mode – PPPoE
PPPoE Username
This specifies the username required in order to connect via PPPoE to acquire
Internet connectivity. The information is typically determined by and can be
obtained from the ISP.
PPPoE Password
This specifies the password required in order to connect via PPPoE to acquire
Internet connectivity. The information is typically determined by and can be
obtained from the ISP.
PPPoE Service
Name
This is a PPPoE parameter which is provided by the ISP.
Note: Leave this field empty if you are not sure.
