http://www.pepwave.com
22
Copyright © 2010 Pepwave
User Manual
Pepwave OfficePoint Series
7.2.1.1
Static WEP
The configuration of Static WEP parameters enables pre-shared WEP key encryption. Authentication is
not supported by this method.
The security level of this method is known to be weak.
Static WEP parameters are entered via the following screen upon selection:
Static WEP Parameters
Key Size
The setting can be configured as either
40 bits (64-bit WEP)
or
104 bits (128-
bit WEP)
.
Key Format
The setting can be configured as either
ASCII
or
HEX
.
Passphrase
Combination of words and characters used to generate an encryption key.
Click
Generate Key
to create the key.
Encryption Key
This setting specifies a user-specified encryption key value.
For
ASCII
format, key length is either
5 or 13
.
For
HEX
format, key length is either
10 or 26
.
Shared Key
Authentication
This setting enables the use of shared key authentication. Open
authentication is the default authentication.
