Pepperl+Fuchs VBG-CCL-G4F, Руководство пользователя

Страница: 38 / 78

AS-Interface
Mailbox
Subject to reasonable modifications due to technical advances. Copyright Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
is
s
u
e
d
a
te
1
0
.1
2
.2
0
0
2
36
9.1.2.4 Set_Permanent_Parameter (SET_PP)
With this call, a parameter value for the specified AS-i slave is configured on the
AS-i/CC-Link Gateway. The value is stored permanently in the EEPROM of the
Gateway.
The configured parameter is not transferred immediately by the AS-i/CC-Link Ga-
teway to the AS-i slave. The configured parameter value is only transferred when
the AS-i slave is activated after turning on the power supply on the AS-i/CC-Link
Gateway.
9.1.2.5 Get_Permanent_Parameter (GET_PP)
With this call, a slave-specific parameter value stored on the EEPROM of the
AS-i/CC-Link Gateway is read.
9.1.2.6 Write Parameter (WRITE_P)
The AS-i slave parameter value transferred with the command is passed on to the
addressed AS-i slave.
The parameter is stored on the AS-i/CC-Link Gateway only temporarily and is not
entered as a configured parameter in the EEPROM!
The AS-i slave transfers its current parameter value in the response (parameter
echo). This can deviate from the value that has just been written according to the
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 43
16
2 T – circuit
3 – B slave address
4 – PP
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 43
16
2 T result
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 01
16
2 T – circuit
3 – B slave address
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 01
16
2 T result
3 – PP