Pepperl+Fuchs VBA-4E2A1A-KE3-ZEL/E2L/SEL, Руководство пользователя

Страница: 17 / 19

AS-i Safety Output Module with Diagnostic Slave
Address Assignment
4.4
.201
4
17
6. Check slave’s ID2 code by using the hand-held addressing device or AS-i
Master. The code should be the same as the ones-digit of the address.
7. Check slave’s IO code by using the hand-held addressing device or AS-i
Master. The code should be “7”.
7.2 Programming the AS-i address of the 4I input slave
(AB address)
2. The desired AB address can be programmed by using the hand-held
addressing device or AS-i Master.
7.3 Programming of the AS-i address of the diagnostics slave
(AB Address)
2. The desired AB address can be programmed by using the hand-held
addressing device or AS-i Master.
Warning!
The correct safety function of the device must be verified once installed within the pro-
tected machinery!
Programming of the AB Address (4I input slave):
1. Set the swiches of the device to SEL / PRG.
SEL
PRG ON
RUN
Programming of the AS-i address of the diagnostics slave (AB address):
1. Set the swiches of the device to SEL / RUN.
SEL
PRG ON
RUN