2
0
2
2
-0
2
52
Vision Configurator Software
6.5
Device Data
The "Device data" area shows the connected device type, firmware version, and MAC ID.
Figure 6.10
Device data
6.6
Image and Line Display
Pictures can be analyzed in the image and line display. By analyzing the recorded profile form,
it is possible to use the measurement result to make a qualitative assessment. This enables
intrusive reflections to be identified and eliminated. There is a relationship between the expo-
sure time and image blur. A correct exposure is dependent on the brightness of the profile and
the incident amount of light. An exposure time that is too short leads to underexposed (too
dark) images, an exposure time that is too long to overexposed images.
There are various options available to you to display and correct recorded data to avoid errors
during recording.
Result View - Line Display
You can open the currently recorded image including height profile under the
Result View
tab.
To do this, click on the
Trigger laser
buttons in the toolbar.
Figure 6.11
Line display
The following context menu appears when you right-click the recorded image:
xx-xx-xx-xx-xx-xx
x.xx.x.-xxx.xx+xxxx.xxxxxx...
1
The line found is shown in red.
2
The laser light is shown in white.
2
1
