Installation
2
0
2
2
-0
2
23
3.6
Setting up Windows Network Communication Between the Sensor
and a PC/Laptop
When the sensor is delivered, it has a fixed IP address:
192.168.2.3
. To enable communication
within the network, the network settings of your PC/laptop must be synchronized with the sen-
sor and may need to be adjusted. To do so, proceed as follows:
Setting the IP Address
The following section describes how to check the network connection settings of your Windows
PC and adapt them accordingly. The illustrations in this description were created using
Windows 7. The description below also applies to later versions of Windows.
1.
Click the Windows "
Start
" button.
2.
Select "
Control Panel > Network and Sharing Center
."
3.
Now click "
Change adapter settings
."
4.
Select the required connection and right-click on your selection. In the selection window, select
Properties
.
