Pepperl+Fuchs Pulscon LTC, Описание функций прибора

Страница: 18 / 80

Pulscon LTC
Function group "basic setup" (00)
D
O
C
T
-0
0
9
4
A
0
6
/2
009
12
07
82
18
3.11 Function "full calibr." (006)
This f u nction is u sed to enter the distance from the minim u m level to the maxim u m level
(= span).
!
Note!
The u sa b le meas u ring range lies b etween the lower and the u pper b locking distance.
The val u es for empty distance (E) and span (F) can b e set independently of this.
3.12 Display (008)
The distance meas u red from the reference point to the prod u ct s u rface and the
meas. value calc u lated with the aid of the empty adj u stment are displayed. Check
whether the val u es correspond to the act u al meas. val u e or the act u al distance. The
following cases can occ u r:
• Distance correct – meas. val u e correct

contin u e with the next f u nction
"check distance" (051) .
• Distance correct – meas. val u e incorrect

check "empty calibr." (005)
• Distance incorrect – meas. val u e incorrect

contin u e with the next f u nction
"check distance" (051) .

E
+
–
100 %
0 %
F
F = full calibration (= span)
F = E – upper blocking distance
max

E
+ –