Pepperl+Fuchs NVO5-111, Руководство пользователя

Страница: 11 / 92

Warning Device NVO5-111
Installation
23
3953
20
12-
04
EN - 9
EN
3 Installation
3.1 Mounting the Sensors
The containers or tanks can be made of various materials. We recommend using
the following methods to secure the device in a suspended position:

If mounting the device in concrete containers, use the NVO5-B mounting set.

If mounting the device in containers made from other materials, such as
plastic or metal, use other suspension devices as appropriate, for example,
screws and screw anchors.
Note!

Before mounting the sensor, read the section on safety, and in particular the
section on mounting/installation.

Do not remove the type label.

During installation, refer to the instructions provided by the manufacturer of
the container or tank.
Warning!
Risk of short circuit
Injuries and damage to the device are possible when working with live parts.

Before working on the device, always disconnect the supply voltage.

Connect the device to the supply voltage only after completion of the work.
Caution!
Malfunction or damage through connection of several sensors.
In case of nonobservance, the safety and operation of the entire alarm system is
not guaranteed.
Connect only one sensor to the warning device. The warning device is designed
for the connection and operation of one sensor only.
Note!
Further information about the sensors are available in the sensors manuals.