Pepperl+Fuchs 2/209, Руководство пользователя

Страница: 43 / 51

DO
CT
-194
6C
2018
-07
32
2903
Trip Amplifier 2/209
Handling with a PC
42
EN
6.6 Action 6 – How to check edited programs
Alterations should be saved as explained in action 5.
6.7 Action 7 - How to edit a program
This task will not have to be undertaken very often. You should have prior programming
experience before attempting it.
6.8 Action 8 - Ending a job
<ALT><R> Load parameters from file.
NAME.209 Enter the desired file name or
<ALT><L> load parameters from the trip amplifier.
Data are now accessible.
<F5> Check the program. Changes can now be made immediately.
Use the tabulator <TAB> key to move to the programming step
which is to be altered and overwrite with the new command.
<F4> Check constants. Changes can now be made immediately. Use
the tabulator <TAB> key to move to the constant which is to be
altered and overwrite with the new value.
<F2> Call the editor.
NAME.EDT Enter the name of the FILE to be edited. Existing programs can
be altered using the editor or new programs can be established.
<F1> offers extensive HELP during an EDIT session. Program
examples are to be found in the DEMO directory under
DEMOE.EDT ... or in directory STD under STD_1.EDT ...
STD_8.EDT.
Comments must be preceded by ";".
Once a program has been established it must pass the
compiler. Only then will you have an executable program which
can be transferred to the trip amp using action 5.
2/209 Remove the connector cable from the PCs serial data link.
2/209 Place jumper MODE in position 3-6 (run mode).