Pepperl+Fuchs 2/209, Руководство пользователя

Страница: 41 / 51

DO
CT
-194
6C
2018
-07
32
2903
Trip Amplifier 2/209
Handling with a PC
40
EN
6 Handling with a PC
The trip amplifier can be reconfigured under menu support using a PC or LAPTOP with
the enclosed disk. Every item on the MENU is supported by HELP functions which are
accessible via key F1 . The following section explains a simple example:
Device handling
•
Action 1 – preparing the hardware
• Action 2 – preparing the software
• Action 3 – preparing a back-up copy
• Action 4 – how to edit standard programs
• Action 5 – how to save and send programs
• Action 6 – how to check edited programs
• Action 7 – how to EDIT a program
• Action 8 – ending a job
6.1 Action 1 – Preparing the hardware
6.2 Action 2 – Preparing the software
6.3 Action 3 – Preparing a back-up copy
2/209 Device to be connected to 24 V DC power supply.
2/209 Device to be connected to a PC via an RS 232 link.
2/209 Set jumper MODE to 4–5 (programming mode, trip monitor
disabled).
Insert a copy of the disk supplied with this manual. Remove WRITE protection.
Alternatively use hard disk.
A: <ENTER> Select drive A, A> displayed on screen.
START <ENTER> Start program in English, the main MENU will appear on the
screen.
<ALT><C> Select PC communications link.
1 Enter figure 1 or 2, select COM1 or COM 2.
<ALT><L> Load data from the trip amplifier.
<ALT><W> Save data in a file
This is to produce a back-up copy of the factory or original
setting.
NAME.209 Enter NAME and save with <ENTER>. If you want to save
data from several devices, repeat above action from
<ALT><L> and issue a file name per device (TAG No).