Page | 19
iii. If the vehicle is older than 2010 and you are using a 2-Pin main cable, verify that the J1708 (black 2-pin with
red/orange wires) is connected. NOTE: If the J1708 is 3-way spliced into the vehicle along with the Vector system,
the PeopleNet yellow should connect to the same vehicle wire as the Vector green, and the PeopleNet green
should connect to the same vehicle wire as the Vector yellow
iv. With all connections verified, try an alternate PMG Main Cable, permanently replacing it if the issue is resolved
1. If the cable and inspection do not resolve the issue, try an alternate PMG. If it is successful, RMA the
original as “NO PERFORMX”
