Pentium SQ578, Руководство пользователя

Страница: 49 / 57

SQ578
4-21
4.8 Peripheral Setup
Peripheral Setup options are displayed by choosing Peripheral Setup from the
AMIBIOS Setup main menu. All Peripheral Setup options are described here.
Figure 6
4.8.1 OnBoard FDC
Set this option to Enabled to enable the floppy drive controller on the motherboard. The
settings are Auto (AMIBIOS automatically determines if the floppy controller should be
enabled), Enabled, or Disabled. The default setting is Enabled.
4.8.2 OnBoard Serial Port1
This option specifies the base I/O port address of serial port 1. The settings are Auto
(AMIBIOS automatically determines the correct base I/O port address), Disabled, 3F8h,
2F8h, 2E8h, or 3E8h. The default setting is Auto.
4.8.3 OnBoard Serial Port2
This option specifies the base I/O port address of serial port 2. The settings are Auto
(AMIBIOS automatically determines the correct base I/O port address), Disabled, 3F8h,
2F8h, 2E8h, or 3E8h. The default setting is Auto.